First Print Of An Example Object From The Sd Card - Renkforce RF500 Maker Construction Kit Operating Instructions Manual

17. First Print of an Example Object from the SD Card
When heating, there may be slight development of smoke or steam. This is normal. Please ensure the corresponding ven-
tilation.
If you are using PLA filament for printing and using the maker construction kit, stick the enclosed adhesive film on the
printing plate for better adhesion of the printed object. Use the enclosed glue stick for the preassembled device.
Alternatively, you can use a slightly structure masking tape or special glue adhesive masking tape (Conrad order no.
1093104) that has been developed specifically for this purpose.
The printing files can be found in the download package in the folder GCODE-PLA.
Before starting, download the current download bundle. The corresponding download can be found on the product page of
our website or in the download area.
In our example, the object "20_20_20Q.gcode" from the download bundle is printed.
Please note! The preassembled file from the download bundle is sliced without heating. If you are using the preassembled device or
the construction kit with heating, slice the file anew (instructions starting in chapter "19. e) Placement of a Printing Object in the
Software"). You may need to activate heating in the slicer settings first (chapter "19. h) More Detailed Description of the Slicer Func-
tions"). Alternatively, you can use the adhesive film or adhesive tape to increase adhesion.
Copy the file onto your SD card.
Push the SD card with the printing file into the SD card reader at the
right of the 3D printer.
Important! The contacts of the memory card must
point towards you when inserting! Simply pull out the
card for removal!
Push the button of the operating knob (10) in the main menu and
turn the operating knob (10) until the menu item "Print from SD" is
selected. Push button for the operating knob (10) again for selection.
The card will be recognised automatically.
The printer shows this with a corresponding message.
Simply pull out the card for removal! This is not per-
mitted while the printer is printing from the memory
card.
Turn the operating knob to select the file "20_20_20Q.gcode" and
push the button of the operating knob (10).
107