Introduction; Explanation Of Symbols - Renkforce RF100 Operating Instructions Manual

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating
instructions for reference!
If there are any technical questions, please contact:
International:
United Kingdom:

2. Explanation of symbols

The lightning symbol inside a triangle is a warning to inform you of potential risks of personal injury, such
as electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in these
operating instructions. Always read this information carefully.
This symbol warns of hot surfaces the contact with which may cause injury.
This symbol warns of hand injury that may occur when reaching into the device in operation.
This symbol warns of hand injury that may occur by belt drive.
Only designed for indoor use.
Read the operating instructions carefully!
The arrow symbol indicates special information and advice on operation.
4
www.conrad.com/contact
www.conrad-electronic.co.uk/contact