Introduction; Explanation Of Symbols - Renkforce RF2000 Operating Instructions Manual

1. Introduction

Dear Customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements. To maintain this status and to ensure safe operation, you as the
user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and handling. Also consider this
if you pass on the product to any third party. Therefore, retain these operating instructions for reference!
All company names and product names are trademarks of their respective owners. All rights reserved.
If there are any technical questions, contact:
Germany:
Austria:
Switzerland:

2. Explanation of Symbols

The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from electric shock. The device contains no
parts that require servicing by the user. Therefore, never open the device.
The symbol with the exclamation mark points out particular dangers associated with handling, function and operation.
This symbol warns of hot surfaces the contact with which may cause injury.
Attention! Danger from moving parts - keep away fingers and other body parts.
This symbol warns of injury that may occur when reaching into the device in operation. Body parts may be crushed, pulled in or
otherwise injured.
This symbol warns of hand injury from the belt drive.
The arrow symbol indicates special advice and operating information.
Observe the operating instructions!
4
www.conrad.de/kontakt
www.conrad.at
www.business.conrad.at
www.conrad.ch
www.biz-conrad.ch