4. Print 3D model
4.1 Printing
1. Save the ".gcode" files in SD card
2. Insert SD card into printers and select the files to print
G_9160b-dz.g
G_9160b-dz.g G_9160b-dz.g
G_9160b-dz.g
G_9160b-dz.g
123
22
Settings
Tool
ReadyPrint>...>Confirm
Warning
Select the correct printing mode.
Print area differs in each mode.
Incorrect mode selection may cause damaqe to the device.
Cancel
Confirm
Click "Confirm" and choose the printing mode as same as you sliced.
Printing
ReadyPrint>...>Printing mode
Single extruder mode
Dual extruder mode
Duplication mode
Mirror mode
Back
Printing