Preparations; Assembly And Setting Up - Lauda Ecoline Series Operating Instructions Manual

Preparations

5 Preparations
5.1

Assembly and setting up

Adjustments of the pump outflows
Setting knob turned anticlockwise
05.08.99
YAEE0012
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ill 1
Setting knob medium position
a) Immersion Thermostat
− Hang the thermostat into the bath to be thermostated
(baths Section 10. Accessories)
− In baths made of plastic the heater should
not have contact to the sides of the bath!
− Do not cover the ventilation opening at the
back of the unit.
Keep clear distance of at least 20 cm.
Adjustment of the pump chamber
− The fixation of the temperature probe has
to be moved upwards approx. 15 mm.
− Adjust the pump chamber.
− Move the fixation of the temperature probe
downwards again (see ill. on the left)
− For all LAUDA baths (plastic and deep-drawn baths),
please fix the adapter (standard accessory) on the
clamping bracket.
− Turn the jet nozzle to face diagonally into the bath. The
outflow for the bath circulation can then be closed.
− Turn the setting knob to the left (see. ill. 1)
ill 2 ill 3.
Setting knob turned clockwise
5