Logbook - Handicare SystemRoMedic RiseAtlas450 Manual

14. Logbook RiseAtlas
•  RiseAtlas450 QuickTrolley, High humidity 50100051
•  RiseAtlas450T SmartPark 50100052
•  RiseAtlas625T SmartPark 50100053
•  RiseAtlas450M QuickTrolley 50100057
•  RiseAtlas450T 50100058
•  RiseAtlas625T QuickTrolley 50100059
•  RiseAtlas625T 50100060
Start by filling in the Installation Certificate Over head Systens as soon as the equipment is installed. It is important that the
installer/service technician signs the document. Detailed descriptionis for new service, maintenance and inspections can
be found in the user manual and service manual.
Note!
Any observations, including defects and damage, of importance to the safety of the hoist should be noted in the
RiseAtlas logbook which should be retained by the person responsible for the servicing/maintenance of the RiseAtlas.
Also the date when corrective actions are taken, in response to noted observations, should be noted in the logbook.
Defects and damage should be reported back to the manufacturer for action and this feedback should be reported in
the logbook.
Every inspection performed on the RiseAtlas shall be noted in the RiseAtlas logbook and a record, such as Inspection
List chapter 11.1, shall be included. The inspection record should be retained safely for examination in the event of an
incident.
If inspection reveals any effect, wear or other damage that jeopardizes the safety of RiseAtlas, the owner should
immediately be notified. In the event of immediate danger to safety, the RiseAtlas should immediately be taken out of
service. It may then not be used until the deficiency has been remedied.
SystemRoMedic
S E R V I C E M A N U A L
TM
43