Setting Up The Chassis; Chassis Component Identification - HPE Apollo a6000 Quick Setup Instructions Manual

Verifying the pallet contents for
the power shelf
Item Description
1 Power shelf chassis
2 Power management module
3 AC input module
4 Power supplies*
5 Power cables*
* The quantity depends on the configuration ordered.

Setting up the chassis

1. Select the proper location for the chassis to be set up, based
on requirements detailed in the HPE Apollo a6000 Chassis
Setup and Installation Guide on the Hewlett Packard
Enterprise website
(http://www.hpe.com/info/Apollo_6000/docs).
2. Remove the packing materials from the pallet.
3.
Place the chassis in the location selected in step 1.

Chassis component identification

Before installing front or rear components into the chassis, review
chassis slot numbering for each component.
Server tray bay numbering
Rear panel components
Item Description
1 I/O modules (10)
2 Fan assemblies (5)
3 Power cage (Right)
4 Management module
5 Power cage (Left)
Fan assembly bay numbering
The chassis has five fan assemblies located in the rear of the
chassis. The following figure identifies the fan assemblies by device
number.
I/O module bay numbering
I/O modules are specific to each server tray and are installed in the
rear of the chassis.