Jensen JCR-350 User Manual page 11

1. Tap the SOUNDS BUTTON (#4) to turn on the soothing sounds.
2. Repeatedly tap the SOUNDS BUTTON (#4) to select one of the sounds available.
The sound indicator and sound will change every time the SOUNDS BUTTON (#4)
is pressed. Available sounds include, Chirping Birds
Summer Night
/ White Noise
3. Once a sound is selected, repeatedly tap the TONE BUTTON to change the tone
level (0-14 - default is 6) of the sound playing.
4. Repeatedly tap the VOLUME +/- BUTTON (#8 / #11) to increase/decrease the
volume level (0-15 levels - default is 7) of the sound playing.
5. Press and hold SOUNDS BUTTON (#4) for 2s to turn off the sounds.
6. The last sound settings will be stored in memory if you have a battery installed in
the back-up compartment.
The sleep timer allows the unit to turn off automatically after a designated time has
elapsed.
Press the TIMER button to set a sleep time of 30/60/90 minutes while playing sounds
or the radio, the chosen sleep time duration will show in the top right corner of the LCD
DISPLAY (#16).
In standby mode, press the SNOOZE/DIMMER BUTTON (#12) repeatedly to select
the brightness settings of the display (High, Medium, Low or OFF).
Press NIGHT LIGHT BUTTON (#15) repeatedly to select the brightness settings of the
nightlight (High, Medium, Low or OFF).
• Clean the radio with a soft damp cloth and let all parts dry completely after
cleaning.
• Do not use any aggressive cleaners, brushes with nylon bristles, sharp or metallic
cleaning utensils, knives, hard scrapers and the like. They could damage the
surfaces of the radio.
• Do not immerse the radio in water and do not let water getting into the housing of
the radio.
• Unplug the power adaptor and clean the radio before storage.
• Always store the radio in a dry and clean place.
LISTEN TO SOOTHING SOUNDS
/ Waterfall / Thunder Storm
.
SLEEP TIMER OPERATION
DIMMER OPERATION
NIGHT LIGHT OPERATION
CARE AND MAINTENANCE
E-10
(default) / Ocean
/ Campfire / Heartbeat
/