Getting Started; Configuring The Ata - Grandstream Networks HT802 Self-Installation And Configuration Manual

Analog telephone adapter

Hide thumbs Also See for HT802:

This guide is only intended for installation of ATA devices over a public internet connection, also referred

to as over-the-top (OTT).

NOTE: If you are porting your telephone number from another service provider, you may experience a

service outage between 7:00am GMT-6 no DST (when the service is provisioned) and 9:00am GMT-6 no

DST (when the numbers are ported over from the other service provider). This is dependent upon a

successful self-install of the devices between these hours. At 7:00am GMT-6 no DST, outgoing calls can

be made with customer installed and configured devices. Incoming calls will not be successful to IBC

devices until the port has been completed.

GETTING STARTED

What you need to get started:

•

The ATA, ethernet cable, and power cord.

•

A computer that is on the same network as the ATA.

•

Configuration credentials. An email will be sent on the date of your service order from the

SaskTel Business Team with a subject line of IBC login and support. Included in the email

will be your IBC User ID and password, along with your ATA user name (10-digit phone

number) and password. You will need these configuration credentials for this process. Keep

this email for future reference. Contact your Service Representative if you did not receive

the email.

1. Connect the ATA to a power source using the power cord provided. A blue power light will come on.

ATA Self-installation and Configuration Guide