Maintenance; Amended Editions And Dates - Canadian Solar Standard Series Installation Manual

Bolting on long frame side using four innermost
mounting holes. Mounting rails run perpendicularly to
the long frame side.
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 5400 Pa
Compatible module types: CS3L-P
Notice: when the modules need to be installed in
heavy snow area, please inform Canadian Solar Inc.'s
technical support department in writing for advices.
Failure to follow this notice may violate the warranty.
7.0

maIntenanCe

· Do not make modifications to any components
of the PV module (diode, junction box, plug
connectors or others).
· Regular maintenance is required to keep modules
clear of snow, bird droppings, seeds, pollen,
leaves, branches, dirt spots, and dust.
· Modules with sufficient tilt (at least 15°), generally
may not require cleaning (rain will have a self-
cleaning effect). If the module has become soiled,
wash with water and a non-abrasive cleaning
implement (sponge) during the cool part of the
day. Do not scrape or rub dry dirt away, as this
may cause micro scratches.
· Snow should be removed using a soft brush.
· Periodically inspect the system to check the
integrity of all wiring and supports.
CanaDIan solaR InC.
545 Speedvale Avenue West, Guelph, Ontario, Canada N1K 1E6
www.canadiansolar.com
· To protect against electric shock or injury, electrical
or mechanical inspections and maintenance
should be performed by qualified personnel only.
· Please refer to Annex D (Module Cleaning Guide)
for additional information on this topic.
amenDeD eDItIons
anD Dates
· The first edition Rev 1.0 was released in June, 2017.
· Rev 1.1 was released in October, 2017.
· Rev 1.2 was released in April 11
· Rev 1.3 was released in April 20
· Rev 1.4 was released in July, 2018.
| 13
, 2018.
th
, 2018.
th
www.canadiansolar.com