Canadian Solar Standard Series Installation Manual page 19

6 |
A2
A2
Use four clamps on the short side.
A2 range = (0 – 250) mm
Maximum Load:
Uplift load ≤ 2000 Pa
Downforce load ≤ 2000 Pa
A1
A1
Use four clamps on the long side. Mounting rails
run parallel to the long side frame.
A1 range = (240 – 330) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 4000 Pa
A1
A1
Use two clamps on the long side and two clamps
on the short side.
Mounting rails run perpendicular to the long side
frame.
A1 range = (100 – 550) mm
A2 range = (200 – 250) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 2400 Pa
EN-Rev IM/GN-AM-EN/A12 Copyright © July, 2018. Canadian Solar Inc.
A2
A2
A2
A2
Use four clamps on the short side and two clamps on
the long side. An additional support bar should be
placed below the center of the module.
A2 range = (200 – 250) mm
Maximum Load:
Uplift load
Downforce load
A1
A1
Use six clamps on the long side.
Mounting rails run perpendicularly to the long
side frame.
A3 range = (80 –380) mm,
A5 range = (80 –380) mm
Maximum Load:
Uplift load
Downforce load
A2
A2
≤ 2400 Pa
≤ 5400 Pa
A3 A4 A4 A5
A3 A4 A4 A5
≤ 4000 Pa
≤ 6000 Pa
A2
A2