Canadian Solar Standard Series Installation Manual page 30

Use two insertion profiles running perpendicularly to
the long side frame. An additional support bar should
be placed below the module. Use two clamps on the
support bar.
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 5400 Pa
MOUNTINg METhOD C: MOUNTINg
METhODS wITh (SINgLE-AXIS TRACkER)
· Canadian Solar Inc. modules can be mounted on
single-axis trackers using center clamps or mounting
holes as described below. All the requirements of
the standard module installation manual and specific
tracker detailed installation instructions should apply.
· The following tracker manufacturers and types are
approved with Canadian Solar modules.
Module Compatible
Type Tracker
CS3U-P, CS3U-
MS, CS6U-P, ATI DuraTrack™HZ
CS6U-M, Tracking System(V3)
CS3W-P
CS3U-P, CS3U-
NEXTracker NX
MS, CS6U-P
Horizon
and CS6U-M
NEXTracker NX
CS3W-P
Horizon
CS3U-P, CS3U-
NEXTracker NX
MS, CS6U-P
Horizon
and CS6U-M
Arctech
single-axis tracker
CS3U-P
Portrait two rows
Mounting Rail
Mounting
Maximum Load (pa)
hardware
Clamp Ear (V3)
Downforce load ≤
400 mm Short Rail
(mounting holes) Downforce load ≤
V2.3 Top Clamp Rails
Rail part No: 20899,
Downforce load ≤
20934, 20907
V2.3 Top Clamp Rails
Rail part No: 20899,
Downforce load ≤
20942, 20908
3438 mm rail
(bolting method /
M8 bolt + M8 plain
washer (O.D. = 24
mm) / Downforce load ≤
1155 mm holes
position)
Rail drawing No:
CS2018002
Reference Manual
(version No.)
Uplift load ≤
DuraTrack™HZ Solar
2400 Pa
Tracker Installation Guide
(January 2017, Rev. B-01)
2400 Pa
Uplift load ≤ NEXTracker NX Horizon
2400 Pa
Installation Manual
2400 Pa (PDM-000149 Rev. B)
Uplift load ≤ NEXTracker NX Horizon
2400 Pa
Installation Manual
2400 Pa (PDM-000149 Rev. B)
Uplift load ≤ NEXTracker NX Horizon
2400 Pa
Installation Manual
2400 Pa (PDM-000149 Rev. B)
Uplift load ≤
2400 Pa SSMFIM-rev01
(SkySmart-Module Fixing
2400 Pa Installation Manual)
www.canadiansolar.com
| 17
2.3.1
2.3.1
2.3.1