Canadian Solar Standard Series Installation Manual page 31

18 |
Arctech
CS3W-P single-axis tracker
Portrait two rows
Soltec SF7 Single-
CS3U-P
Axis Tracker
Soltec SF7 Single-
CS3W-P
Axis Tracker
Soltec SF7 Single-
CS3U-P
Axis Tracker
Soltec SF7 Single-
CS3W-P
Axis Tracker
· The allowable maximum twist angle of the module
is 0.5 degree.
· For any single axis tracker installation method with
portrait one row, bearing house cannot be allowed
to locate under CS3W-P, please put bearing house
between modules.
ANNEX B: ALTERNATIvE gROUNDINg METhODS
Canadian Solar modules can be grounded using
third party grounding devices as described below.
The grounding methods are certified by CSA
according to UL 1703. All the basic requirements
of the main installation manual should apply to
EN-Rev IM/GN-AM-EN/A12 Copyright © July, 2018. Canadian Solar Inc.
3588 mm rail
(bolting method /
M8 bolt + M8 plain
washer (O.D. = 24
mm) /
Downforce load ≤
1155 mm holes
position)
Rail drawing No:
CS2018007
2454 mm rail
(Bolting method /
M6 bolt + M6 plain
washer (O.D.= 18 mm)
/ 1300 mm + 400 mm
holes position)
Downforce load ≤
Rail drawing No:
SF7-MR-04-101_Dr_
P00
SF7-MR-06-102_Dr_
P00
2542 mm rail
(Bolting method /
M6 bolt + M6 plain
washer (O.D. = 18
mm) / 1300 mm + 400 Downforce load ≤
mm holes position)
Rail drawing No:
SF7-MR-04-018_Dr
long rail
(bolting method /
M8 bolt + M8 plain
washer (O.D. = 24
Downforce load ≤
mm) /
1155 mm holes
position)
3297 mm rail
(bolting method /
M8 bolt + M8 plain
washer (O.D. = 24
mm) /
Downforce load ≤
1155 mm holes
position)
Rail drawing No:
SF7-MR-04-017_Dr
· Please contact the tracker manufacturer and
Canadian Solar Inc.'s technical support department
for details in regard to specific projects.
the alternative grounding methods. For detailed
grounding instructions, please refer to related third
party installation manuals.
Uplift load ≤
SSMFIM-rev01
2400 Pa
(SkySmart-Module Fixing
Installation Manual)
2400 Pa
Uplift load ≤
1800 Pa SF7QG-1500V-en,
revision 1.0
1800 Pa
Uplift load ≤
1200 Pa SF7QG-1500V-en,
revision 1.0
1200 Pa
Uplift load ≤
2400 Pa SF7QG-1500V-en,
revision 1.0
2400 Pa
Uplift load ≤
2400 Pa SF7QG-1500V-en,
revision 1.0
2400 Pa