Canadian Solar Standard Series Installation Manual page 18

A1
A1
Use four clamps on the long side. Mounting rails
run parallel to the long side frame.
A1 range = (410 – 490) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 5400 Pa
CS3k-p, CS3k-MS, CS6k-p, CS6k-M, CS6k-MS
A1
A1
Use four clamps on the long side. Mounting rails
run perpendicularly to the long side frame.
A1 range = (0 – 239) mm
Maximum Load:
Uplift load ≤ 2000 Pa
Downforce load ≤ 2000 Pa
A1 range = (240 – 330) mm
Maximum Load:
Uplift load ≤ 3600 Pa
Downforce load ≤ 5400 Pa
A1 range = (331 – 550) mm
Maximum Load:
≤
Uplift load 2400 Pa
Downforce load ≤ 2400 Pa
A1
A2
A2
A1
Use four clamps on the short side and two clamps
on the long side. An additional support bar should
be placed below the center of the module.
A2 range = (200 – 250) mm
Maximum Load:
Uplift load
Downforce load
A1
A2
A2
A1
Use four clamps on the short side. Mounting rails
run parallel to the long side frame.
A2 range = (200 – 250) mm
Maximum Load:
Uplift load
Downforce load
≤ 2400 Pa
≤ 5400 Pa
≤ 2000 Pa
≤ 2000 Pa
www.canadiansolar.com
| 5
A2
A2
A2
A2