Table of Contents
Advertisement
3. Installation and wiring
3.2. Installation
Safety instructions for waste disposal
CAUTION
Installation
3.2
Installation environment
The isolated D/A conversion module is designed to withstand extreme climatic
conditions. However, care must be taken for the following items to ensure reliability and
stability.
Environmental conditions
1.
Install on a waterproof and dustproof control panel.
−
Ensure that there is no continuous impact or vibration on the module.
−
Avoid exposure to direct sunlight.
−
Ensure that there is no dew formation caused by rapid change in temperature.
−
Ensure an ambient temperature of 0-55°.
−
2.
Installation
Ensure that wiring waste does not get inside PLC when wiring or drilling screw
−
holes.
Do not install on the same panel as a high-voltage device.
−
Ensure a distance of at least 50mm from a duct or near-by module.
−
Ensure that it is grounded in a place free from noise.
−
46
Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
Product or battery waste will be processed as industrial waste. The
waste may discharge toxic materials or explode itself
Honeywell
.
200
September 2010
Advertisement
Table of Contents
