Table of Contents
Advertisement
and employees, and from and against all claims, demands, losses, and liability for
costs of fees, including reasonable attorneys' fees, in connection therewith.
Unpacking Procedure
Caution:
If any damage to the shipment is noticed before unpacking, a claim must be filed with
the commercial carrier.
All containers should be opened and unpacked carefully in order to prevent damage to
the contents.
The following steps are used to unpack equipment in preparation for installation:
1. Open the container and remove the unit(s) and all packing material. Retain the
2. Inspect the contents for shortage. If items are missing items, contact the order
3. Visually check contents. If damage is discovered, perform the following:
Shipping Instructions
To ship equipment back to Honeywell, Inc.:
1. Contact the customer service department at 800-232-4576 before returning
2. From the customer service department, obtain the Return Authorization
3. Show the RMA number on all packages shipped. Packages which are not
4. Carefully pack the equipment for shipment. Use the original packing material
PW-6000 Input Module Installation Guide, Document 800-01952, Revision B
container and all packing materials. They may be used again for reshipment of
the equipment, if needed.
entry department at 800-232-4576.
• If shipping caused damage to the unit, a claim must be filed with the
commercial carrier.
• If any other defect is apparent, call for a return authorization.
equipment. When you call please have available:
• A description of the problem or reason you are returning the equipment.
• Your original purchase order number, invoice number and if the unit is
still under warranty.
• A new purchase order number if the unit is not under warranty.
Number (RMA).
marked with an RMA number will be refused at the factory and returned to
you
.
COD
whenever possible.
Front Matter
Unpacking Procedure
vii
Advertisement
Table of Contents
