Monitoring Or Testing; Monitoring Or Testing Window - Honeywell 2MLF-DV4S User Manual

4.4

Monitoring or testing

Monitoring or testing window

Perform the following steps to monitor the isolated D/A conversion module.
Step
1
In the SoftMaster, from the Online menu, select Connect.
From the Monitor menu, select Special Module Monitoring to start
monitoring.
If the PLC CPU status is not Online, then the Special Module Monitoring
option is disabled.
2
With SoftMaster connected to PLC CPU (Online status), from the Monitor
menu, select Special Module Monitoring to display the Special Module List
window, which displays base or slot information in addition to special module
type. The list dialog box displays the module currently installed on the PLC
system.
R200 Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
September 2010
4. Operations and Monitoring
Action
Honeywell
4.4. Monitoring or testing
67