Honeywell 2MLF-DV4S User Manual page 4

Acronyms and definitions
Acronyms and definitions
Acronym/Term
A/D converter
Analog input module
Channel
Conversion time
D/A converter
Full scale
Full scale error
Full scale range
LSB
iv Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
Converts analog to digital value.
This module converts analog voltage/current input to digital
value. It has a resolution of 14 and 16 bits.
Related with the terminal of analog I/O module and
connected to various voltage/current I/O devices,
respectively, with applicable data and diagnosis function.
Time taken by an analog input module to sample and
convert the analog signal to digital value. Also, it refers to
the time taken by an analog output module to convert a
digital value to analog value.
Related with the output module, it is used to make
continuous size of analog voltage and current signal
proportionately to the digital value.
Defined as the size of voltage/current where the normal
operation is executed.
Displays the graph difference between agreeable analog-
converted value and actual analog-converted value.
Displays the difference between the maximum and the
minimum of the analog input.
Least significant bit (LSB) displays the minimum value of the
bit unit.
Honeywell
Definition
September 2010
R200