CHARGERS, BATTERY PACKS AND ACCESSORIES
Accessories for the NetLink 8000 Series Wireless Telephone
include three different charger models, three different Battery Pack
models, a headset and several carrying options.
Battery Packs
The Battery Packs must be recharged periodically. Each type of
Battery Pack requires a different amount of time to achieve a fully
charged state from a fully depleted state. Three Battery Pack
options are available
Type
Standard
Extended
Ultra-Extended
The Battery Pack icon on the status row indicates the charge
amount remaining. Additionally the handset will sound warning
tones and display the
than two minutes of talk time remaining.
A melody will play when the handset is powered on for the first
time after being fully charged, unless this feature has been disabled.
Each Battery Pack type has a different melody.
See your system administrator if you have questions about the type
of Battery Pack you have been issued.
The type of Battery Pack is printed on the label.
Remove the Battery Pack and view the label to
determine the type of Battery Pack you have been
issued.
The Battery Pack can be changed while the call is still in progress.
Do not press
END
replace with a charged Battery Pack, press
back on and then press
30
Talk Time
4 hours
6 hours
8 hours
message when there are fewer
Battery Low
. Quickly remove the discharged Battery Pack and
to resume the call.
START
Standby Time
Charging Time
80 hours
120 hours
160 hours
to turn the handset
END
2 hours
3 hours
4 hours
Need help?
Do you have a question about the NetLink 8000 and is the answer not in the manual?
Questions and answers