Phonebook Edit Entry Options; Speed-Dial - SpectraLink NetLink 8000 User Manual

Phonebook Edit Entry Options

If you want to Then
Dial number Press
Assign a speed-dial
number to this entry
Edit an entry Press the
Return to
phonebook list

Speed-Dial

The NetLink 8000 Series Wireless Telephone can assign up to 10
speed-dial keys to numbers entered into the phonebook.
Open the speed-dial list by pressing the
mode. If programmed, the first item on this list is the system-wide
speed-dial number set by the system administrator. It is specially
marked with a greater-than symbol (>) on the left side of the row.
It is usually reserved for emergency situations.
To make a speed-dial call, press and hold the corresponding key for
one second. The system speed-dial key must be pressed for three
seconds. The handset will display the name and number for one
second before the call is dialed. You may press
ond to terminate the call.
You may also use the
then press
START
softkey returns you to the standby mode.
A phonebook entry may be assigned to a speed-dial key from the
speed-dial list. Select the speed-dial key that you wish to assign and
22
START
Press the
to highlight an empty slot and then press
NavOK.
number display and edit the existing
number.
Press the
keys to highlight a number or listing and
Nav
or the softkey to dial the number. The
Spkr
or the softkey.
Spkr
softkey. Use the Nav keys
Spdl
softkey to open the enter
Edit
softkey or
Back NavOK
softkey from standby
Spdl
END
.
during this sec-
Exit