123B/124B/125B
Users Manual
Figure 10. AutoReading Function
20
Measurement Type
To manually set up or change the measurement type:
1.
2.
3.
hxv11.eps
4.
5. Confirm that the selected measurement type is the
P ush to open the Scope and Meter button bar.
P ush 1 to open the MEASURE menu for Input A.
Push 4 to open the MEASURE menu for Input B.
P ush Z/Y to highlight the measurement type, for
example, Hz.
When more setup selections are available for a
measurement type, you see a . Push to open
the submenu and make a selection.
P ush to accept the measurement type and
close the menu.
main reading. The former main reading moves to the
smaller secondary reading position.
hxv12.eps