Test Limits - Fluke ScopeMeter 123B User Manaul

123B/124B/125B
Users Manual

Test Limits

The test limits apply to the selected bus type. To change
the test limits:
1. P ush  to open the MENU.
YZ
2. U se to highlight BUSHEALTH.
3. P ush  to open the BUS HEALTH menu.
YZ
4. U se to highlight the bus type.
Select User1 or User2 to create a customized set of
limits to test nonstandard bus systems.
Default settings are RS232 for User1 and Foundation
Fieldbus H1 for User2.
5. P ush  to make the change.
6. From the BUSHEALTH main screen, push 1 to
open the SETUP LIMITS menu. The header shows
the bus type.
YZWX
7. U se to highlight the property for the limit.
Use 2 to set all limits to the default setting.
48
Note
hxv36.eps