Before First Use; Cleaning - Judge JEA43 Instruction Manual & Recipe Booklet

Before First Use

Remove any labels and/or swing tickets.
In order to remove any residue
from the manufacturing process
before use, proceed as follows:
1.
Follow the "Cleaning" instructions. Ensure
the parts are completely dry.
2.
Place the Bread Pan
Body at an angle (see diagram) and
adjust until it drops home. Rotate the
Bread Pan clockwise to lock into place.
3.
Locate the Kneading Blade
spindle in the centre of the Bread Pan
and push down until it is seated.
4.
Select the Bake Programme
Menu Button . Start the programme
using the Start/Stop Button
•
It is normal for smoke and a
hot smell to be emitted during
this process; manufacturing
residues are being removed.
5.
After 10 minutes, stop the programme
using the Start/Stop Button
machine to cool for 20 minutes.
6.
Repeat steps 1 to 3 above to clean and
re-assemble the Bread Maker.
•
DO NOT IMMERSE ANY PART OF THE
BREAD MAKER BODY
in the Bread Maker
on the
using the
.
. Allow the
IN WATER
Digital Bread Maker

Cleaning

Disconnect the Bread Maker from the
power and allow to cool before cleaning.
1.
Rotate the Bread Pan
to unlock (see diagram). Lift out of the
Bread Maker Body
2.
Hold the Kneading Blade
pull upwards to remove it from the spindle
in the centre of the Bread Pan
•
If the Kneading Blade
to remove, fill the Bread Pan
with hot water and allow to
soak for about 30 minutes.
3.
Wash the Bread Pan
Blade in warm water and detergent or
washing-up liquid. Do not use any harsh
or abrasive cleaning materials. Both these
items are dishwasher safe.
4.
Wash the Cup
Hook in warm water and detergent or
washing-up liquid. Do not use any harsh
or abrasive cleaning materials.
5.
Wipe the Bread Maker Body
and Lid with a cloth, slightly dampened
with warm water and detergent. Do not
use any abrasive cleaning materials.
6.
Dry all parts thoroughly before storing,
when the Lid should be left closed.
counterclockwise
.
firmly and
.
is difficult
and Kneading
, Spoon and