Functions - Judge JEA43 Instruction Manual & Recipe Booklet

Digital bread maker
Hide thumbs Also See for JEA43:
Table of Contents

Advertisement

Functions

The functions provided by the Controls and Indicators above are as follows.
Please familiarise yourself with these before operating the Bread Maker.
At Power-On
When the Bread Maker is plugged in
and switched on at the mains, a single
long "beep" will sound, the Selected
Programme
will be displayed as '1'
and the Time Left
as 3:00, in the format h:mm, with
the colon ":" displayed steadily. The
Selected Loaf Colour
are each indicated by a small
triangle and are initially displayed
as Medium and 2lb, respectively.
Programme Select
There are 15 different numbered
programmes available, listed at the
top of the Controls & Indicators panel
; these are described in more detail
under "Programmes". The selected
programme number (1 to 15) is
shown in the digital display
Pressing the Menu Button
the programme number with each press,
until Programme 15 is reached, after
which it will cycle to Programme 1.
Loaf Colour
Baking programmes allow three
alternative loaf colours to be selected,
Light, Medium or Dark, defaulting to
Medium. The Selected Loaf Colour
is indicated by a small triangle and
selected using the Loaf Colour Button
, which cycles through the three options.
Loaf Size/Weight
Baking programmes allow two
alternative loaf sizes to be selected,
1.5lb or 2.0lb (approximately 0.7kg
or 0.9kg), defaulting to 2.0lb. The
Selected Loaf Weight
by a small triangle and selected
using the Loaf Size Button
alternates between 1.5lb and 2.0lb.
will be displayed
and Weight
.
increases
is indicated
, which
Starting and Stopping the Programme
When the required programme (with any
adjustment - see Programme Time) has been
selected, pressing the Start/Stop Button
will start the programme. The Program
Running Indicator
Time Left
display will count down, with
the ":" flashing. All buttons except Stop/
Start are disabled during this period.
The programme can be stopped at any time
by pressing the Start/Stop Button
holding for 3 seconds. A single long "beep"
will sound and the display will return to its
Power-on status (see "At Power-on").
Programme Time Delay
It is possible to delay the start of many of the
programmes, for example if you want a loaf
to be freshly baked for the following morning.
Pressing the Time+ Button
increase the overall time by delaying the start
in increments of 10 minutes; pressing the Time-
Button
reduces this delay. Holding down
either button causes the time to adjust rapidly
in increments of 10 minutes. The total Time
Left
(delay + baking time) is displayed; the
maximum extended programme time is 13 hours.
For example, if you wish your bread to be ready
for 07:00 am the following day and it is now
08:30 pm (20:30) today, you need your bread to
finish baking in 10 hours and 30 minutes. After
adding your ingredients, you can select your
required programme and the total programme
time will be displayed as Time Left
3:50 for Programme 1. Use the Time+
Time-
Buttons to adjust the displayed Time
Left
to 10:30. Once the Start/Stop Button
is pressed, the Time Left
it reaches 3:50, then the baking programme will
begin and run for 3 hours and 50 minutes.
DO NOT USE THE PROGRAMME TIME DELAY
WITH EASILY PERISHABLE INGREDIENTS, SUCH
AS EGGS, FRESH MILK, FRUIT OR ONIONS.
Digital Bread Maker
will illuminate and the
and
repeatedly will
, for example
and
will count down until

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents