Advertisement
Setting the modem driver
These settings of the system modem driver are used
during each dial-up procedure for initialisation of the
modem driver and must be done exactly as described.
In the overview of the installed modem drives, the presently
installed modem driver is shown.
With „Properties" the settings of the marked modem driver
can be controlled and changed.
The pre-setting „Maximum Port Speed"
of 115200 is not changed.
In the pull-down window „ISDN" the „European ISDN
(DSS1)" is selected under „Switch Type".
Under „First Number" the own telephone number is entered.
This number is later interrogated by the substation router
during "selective call-acceptance".
Continue to the pull-down menu „Advanced"
HELP_DIG48_SIP4_INSYS_MOROS_ISDN_EN100_EN1.DOC
Seite 9 von 25
Power Transmission and Distribution
Energy Automation
27.08.2008
Advertisement
