Advertisement
Installing the modem driver
If the office modem "INSYS Pocket ISDN TA" was already connected prior to the re-start of the
computer, the modem is recognised by Windows XP as a PnP modem during the start, and the
installation process is started automatically.
The suggested driver TA+POX X.75 (PnP) is not needed for this application.
Once the driver has been installed this irritating installation suggestion will not appear in future.
Connect the modem.
Re-start the computer.
Select the point „Install the software
automatically ..." in „Found New
Hardware Wizard"
Select Install.
Insert the driver CD.
Next >
Follow the instructions in Windows and
install the driver.
The correct modem driver TA+POX (PPP,V.120,X.25,V.110) for this application is included with
the modem on a CD, or may be downloaded from the "SIPROTEC-Download-Area". For the purpose
of installation the INSYS-driver-CD must be inserted into the CD/DVD-drive of the computer,
alternatively the driver must be available from the hard-drive or another storage medium.
The driver, unzipped to C:\Siemens\... is then installed from the SIPROTEC-Download-Area.
In the „Control Panel" the
„Phone and Modem Options" are opened.
With „Add..." a new modem driver
is installed in Windows.
HELP_DIG48_SIP4_INSYS_MOROS_ISDN_EN100_EN1.DOC
Seite 5 von 25
Power Transmission and Distribution
Energy Automation
27.08.2008
Advertisement
