Advertisement
The „Local IP-Address of PPP-
Connection" and the „Remote IP-
Address" are used for the temporary
connection. They can, do however not
need to be changed.
A „Gateway for Dial-In-Connections"
can, does however not need to be
entered
Confirm all settings with „OK".
The windows „Dial-Out", „Inputs"
and „Outputs" are not described here,
as they do not contain any relevant
settings for this application.
In the window „System" the system time
can be set under „Time" with „Set
Systemtime to:" and under „Timezone"
the time zone may be entered.
Save the settings with „OK".
In the window „System", no further
settings are required under „Reset" and
„Update" .
Under „System Data" (no longer visible
at the bottom in the picture on the right)
the current device data is displayed.
With the button „Help" a new window is
opened and general help is offered for
every page.
When all settings have been saved with
„OK", the ISDN router has been set
correctly and the explorer window can be
closed.
HELP_DIG48_SIP4_INSYS_MOROS_ISDN_EN100_EN1.DOC
Seite 16 von 25
Power Transmission and Distribution
Energy Automation
27.08.2008
Advertisement
