Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EcoQuest Ozone Blaster 5G
Summary of Contents for EcoQuest Ozone Blaster 5G
- Page 1 Ozone Blaster 5G By EcoQuest USER MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENT Introduction Normal mode Safety notices Treatment times User responsibility Recommendations Safety guide lines Interval mode Before use During use Ozone plates After use Removing & Changing Description & specifications Trouble shooting Specifications Working environment Warranty terms Parts Display... -
Page 3: Introduction
INTRODUCTION Safety notices This user manual is made for helping you use your Throughout this document the following symbols are used to indicate Ozone Generator more safely and to give you basic special precautions or procedures you should note. operation and maintenance information. Read the WARNING! - This symbol indicates a warning you should follow instructions carefully before attempting to use the... -
Page 4: Safety Guide Lines
SAFETY GUIDE LINES After use When using your Ozone Generator, certain basic Ozone dissipates on average within 30 minutes, which varies by safety regulations must be observed, to reduce the certain environmental factors such as temperature and humidity. The risk of damage. time before the area can be entered is usually less than two hours. -
Page 5: Description & Specifications
5 % till 70 % non-condensing Humidity： and more. Specifications Model: Ozone Blaster 5G Ozone output: Max 5000mg/hour Power Consumption: Air Volume: Max 106 CFM 238×170×217mm Size：... -
Page 6: Parts
PARTS 1.Air intake 2.Air outlet 3.FAN cover 4.Screen interface 5.Power source 6.Handle 7.Feet... -
Page 7: Display
DISPLAY 1. Power button 2.Interval button 3.Timer button 4.Ozone button 5.LED screen... -
Page 8: Normal Mode
Press Ozone button. NORMAL MODE Connect power cable to product and then to a power outlet， will display ‘POWER OFF’. Press button Timer to select the run time in 15min intervals, with a Press the Power to maximum run time of 3 turn the unit on. -
Page 9: Treatment Times
heavier than air. Come back after the When treating vehicles, or areas with low air volume, open windows treatment time plus or ducts slightly to allow fresh air to get inside. two hours so that the Open all surfaces within the treatment area so that they ozone may dissipate. -
Page 10: Ozone Plates
WARNING! – Do not remove ozone plate when product is plugged Press button Interval into power outlet. Risk of electric shock. three times, machine will exit interval model. OZONE PLATES Removing & Change The lifespan of the plate ranges from 6000 hours to Remove the cover 8000 hours depending on the amount of moisture and dust in the air. -
Page 11: Trouble Shooting
Reinstall the cover TROUBLE SHOOTING Problem Possible reason Solution Power cord not properly connected. Check so that power cord is properly Unit not starting connected. Fuse has burned. Replace the fuse. Press button ‘Power’ to activate. Unit starts, but display doesn't Unit has not been activated. -
Page 12: Warranty Terms
WARRANTY TERMS Product warranty EcoQuest warrants this product will be free from defects in materials and / *This warranty is only for product not subjected to rough use, abuse, or workmanship for a period not exceeding one year from the date of applications other than set forth in this manual, modifications, accidents, purchase for the original purchaser.