Warranty ............Please record the serial number of your CAIR unit: Serial # ____________________________________________________________ Please record the name and phone of your EcoQuest Dealer: _______________________________________________________________ Name ______________________________________________________________ Phone CAUTION! - Disconnect power cord before servicing.
Applications Eliminate • Smoke • Odors • Tobacco Smoke Plus it works as an appliance to Sanitize an area to Reduce • Mold • Mildew • Bacteria For use in your Salon, Smoke Damaged Areas, Apartment, Office, Automobile, Boat... anywhere you need clean air! Notable Features •...
The Ozone Blaster Adjustable reproduces the natural conditions found in the outdoors and is also designed to create an artificial environment. Ozone has been shown to remove odors and kill mold, mildew, bacteria and viral organisms.
OZONE PLATE INSTALLATION The Ozone Blaster Adjustable utilizes EcoTech Purification Plates. 1. Remove the rear lint screen. 2. Fully insert the EcoTech Purification Plates (a,& b) between the guide-grooves in the top and bottom of the plate cage (between the...
A ceiling fan can also aid in distribution of cleansing properties. The Ozone Blaster is most effective when placed in a position that allows the ozone to be mixed evenly and thoroughly with the polluted air.
SETTING AND ADJUSTING CONTROLS 1. FAN CONTROL The disbursement of cleansing properties is best accomplished with good air circulation. This will be determined by personal preference and the distance you wish the cleansing properties to be dispersed. Note: A ceiling fan can also aid in distribution of cleansing properties. 2.
Signage should state “DO NOT ENTER, OZONE TREATMENT IN PROGRESS.” MAINTENANCE Periodic maintenance is required to insure that the Ozone Blaster Adjustable operates properly. A severely polluted environment can foul an EcoTech Purification Plate in as little as two weeks or as long as a year.
Page 9
Ozone Plate Carefully remove the EcoTech Purification Plates (a,b) from the card cage by grasping the middle of the edge nearest to you, and slowly pulling straight out. Clean the plate with hot water and ammonia. Dry completely using a hair dryer if necessary.
Troubleshooting - What to look for first. 1. I have plugged in the unit, turned "ON" the power switch and nothing happens… what's wrong? • Make sure the electrical outlet is capable of providing power to the unit. • Check the lint screen located at the back of the machine to ensure that the safety switch activator clip depresses the safety switch.
• Are the filter and fan housing clean? If your unit fails to operate properly after performing trouble-shooting, contact your EcoQuest Dealer for further assistance, contact us at the address located in this manual, or visit www.EcoQuest.com for additional technical support.
This warranty excludes ozone plates, which are covered for 90 days from the same date of purchase. See warranty card for specific details. If you have any questions concerning your Ozone Blaster system, please see your local EcoQuest Dealer. If your unit is defective, please contact EcoQuest International, 310 T.