Connecting To A Landline Telephone Jack - Boston Scientific LATITUDE Patient Manual

Connecting to a Landline Telephone Jack

Complete the steps below to set up the Communicator
for a landline telephone connection.
3. Connecting a telephone is optional.
Figure 4. Connecting to a landline telephone jack
1. Plug one end of the Communicator telephone cord
(included) into the jack labeled
2. Plug the other end of the cord into the telephone
jack on the wall.
Note: If you have DSL Internet service, you may
need to use a DSL fi lter between the telephone wall
jack and the Communicator. Refer to "DSL Internet
Service" on page 48.
3. Optional: To use a telephone with this wall jack, you
may plug your telephone into the jack labeled
Note: Your Communicator and a telephone can
share the same telephone wall jack. However, they
cannot be used at the same time.
LATITUDE
.
Communicator Patient Manual
®
.
11