Replacement Of Drive Motor - Samsung MG23J5133AK Service Manual

3. Disassembly and Reassembly

3-5 Replacement of Drive Motor

Parts
Drive Motor
Drive Motor
This document can not be used without Samsung's authorization.
Explaination Photo
16
Explaination
1. Take out the glass tray,
guide roller from oven cavity,
disconnect power.
2. Remove turn table motor cover
from case bottom.
CAUTION : Remove sharp edge after
cover removal.
3. Disconnect leads from motor.
4. Remove the screws securing
motor to bottom of over cavity.
5. Lift out the motor.
6. When replacing the motor, be
sure to remount it in the correct
position.
NOTE : The shaft of motor should
fit tip coupler.
7. When reassemble a drive
motor cover, give a turn in a
180˚ and fix with a screw.
NOTE : Bring the spare screw from
service center.