Replacement Of Drive Motor - Samsung M187ASTR Service Manual

3. Disassembly and Reassembly

3-4 Replacement of Drive Motor

Parts
Drive Motor
Drive Motor
Explaination Photo
COVER FIXING SCREW :
MATCHINE SCREW(6006-001170)
13
Explaination
1. Take out the glass tray,
guide roller from oven cavity,
disconnect power .
. Remove turn table motor cover
from case bottom .
CAUTION : Remove sharp edge
after cover removal .
3. Disconnect leads from motor .
4. Remove the screws securing
motor to bottom of over cavity .
6. Lift out the motor .
5. When replacing the motor, be
sure to remount it in the correct
position .
NOTE : The shaft of motor should
fit tip coupler.
6. When reassemble a drive
motor cover . give a turn in a
180° and fix with a screw.
NOTE : Bring the spare screw
from service center .