Download Print this page
Nilfisk-Advance CS7000 How-To Manual
Hide thumbs Also See for CS7000:

Advertisement

Quick Links

1
Turn off machine and
raise the hopper over a
dumpster.
1
Leave the drain hose
near a floor drain.
Remove and empty the
debris catch cage.
4
Inspect and clean
recovery tank float
balls.
CS7000 How To
Empty the Debris Hopper
2
Open the hopper door
and press the shaker
button.
Clean out the Recovery Tank
2
Release the recovery
tank latch lever to tilt
tank for cleaning.
5
Leave the recovery lid
open to air dry
overnight.
Page: 1
3
Close hopper door,
back machine away,
and lower hopper to
clear dump location.
3
Spray out the tank.

Advertisement

loading
Need help?

Need help?

Do you have a question about the CS7000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nilfisk-Advance CS7000

  • Page 1 CS7000 How To Empty the Debris Hopper Turn off machine and Open the hopper door Close hopper door, raise the hopper over a and press the shaker back machine away, dumpster. button. and lower hopper to clear dump location. Clean out the Recovery Tank...
  • Page 2 CS7000 How To Store the Machine Rinse the squeegee Clean and inspect side Use the handle near and inspect and rotate skirts. the center to adjust so or replace if it’s ripped squeegee tips contact or torn. the floor equally.
  • Page 3 CS7000 How To Weekly Maintenance Purge onboard Remove and inspect Close solution shut-off detergent system (if the hopper dust control valve and Inspect and equipped). filter. Clean or replace clean the solution filter as appropriate. found at the right-rear of machine.