Roland VersaUV LEF2-200 Setup Manual page 10

To Ensure Safe Use
In the event of ingestion or physical distress
• In the event of contact with the eyes, immediately flush with water for at least 15 minutes. If eye irri-
tation continues, seek treatment by a physician.
• In the event of contact with skin, immediately wash with soap. If irritation or inflammation occurs,
seek treatment by a physician.
• In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physician.
Forcibly inducing vomiting may lead to danger of choking.
• If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or
nausea persists, seek treatment by a physician.
* Refer to the appropriate safety data sheet (SDS) for the chemical substances used in the ink
and the safety related to those substances.
Remove the object to be printed on or
switch off the sub power when printing is
not being performed.
The continued application of heat at a single
location may cause fire or produce toxic gases.
Never look at the blue-white (ultraviolet)
light emitted from the print-head area for an
extended time.
Looking directly at the ultraviolet light from up
close for an extended period may result in eye
injury.
Caution: Ultraviolet Light
This machine is fitted with covers to keep external leakage of ultraviolet light at low levels, but incor-
rect handling or operation can lead to physical injury due to ultraviolet light. The extent of injury
depends on the intensity and wavelength of the ultraviolet light, and the length of time of exposure.
Prolonged exposure to strong ultraviolet light of hazardous wavelengths can cause injury to the eyes
or skin. Exercise caution.
1.Introduction
8
Danger of fire, burns, or toxic gas emissions
CAUTION
This machine uses ultraviolet light
CAUTION