Table of Contents
Advertisement
installation & setup
step three
When connecting each wire, loosen the terminal screw, insert the wire into a
terminal slot, and tighten the terminal screw until the wire is secured
Connect the neutral wires to the WHITE terminal slots
1
Connect the load wire to any LOAD terminal slot
2
Connect the hot wire to any HOT terminal slot
3
Connect the ground wire to the green wiring lead on the device Use a wire nut
4
to secure the wires together
NOTE: If you need extra length on your wires, wire leads are included in your packaging. Cap
any unused wires from the wall using the included wire nuts.
12
|
wire the smart switch
Hide quick links:
Advertisement
Table of Contents
