Table of Contents
Advertisement
installation & setup
|
step six
Noting which side faces out, align the sub-plate over the device screws Use
1
the sub-plate screws (provided) to secure the sub-plate to the smart switch
Tighten the device screws to secure the smart switch to the electrical box
2
Angle the
3
sub-plate Push the screwless wall plate down and in until it "snaps" into
place over the sub-plate
NOTE: To remove the wall plate, place the tip of a flat blade screwdriver into the slot under
the wall plate and twist gently.
18
attach the screwless wall plate
end of the screwless wall plate over the top edge of the
Hide quick links:
Advertisement
Table of Contents
