Solid State Drive - HP VR Backpack G2 Maintenance And Service Manual

Solid state drive

Table 5-3 Solid-state drive descriptions and part numbers
Description
1 TB
512 GB
256 GB
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the top cover (see
3. Remove the memory fan (see
Remove the solid state drive (SSD):
1. Peel back and lift the protective tape from the solid-state drive.
2. Remove the Phillips M2.0 × 3.0 screw (1) that secures the solid-state drive, and then pull the solid-state
drive out of the socket (2).
Reverse this procedure to install the solid-state drive.
18 Chapter 5 Removal and replacement procedures
(Preparation for disassembly on page
Top cover on page 14).
Fans on page 16).
Spare part number
L62399-001
L62401-001
L62400-001
14).