Wlan Antenna - HP VR Backpack G2 Maintenance And Service Manual

WLAN antenna

Table 5-5 WLAN antenna description and part number
Description
WLAN antenna kit (includes gasket)
Before removing the WLAN antenna, follow these steps:
1. Prepare the computer for disassembly
2. Remove the top cover (see
Remove the WLAN antenna:
1. Remove Phillips M2.0 × 3.0 screw (1) and the Phillips M2.5 × 4.0 screw (2) that secures the antenna to
the computer.
2. Lift the WLAN antenna enough to access the WLAN module underneath (3), and then disconnect the
antenna cables from the WLAN module (4).
Reverse this procedure to install the WLAN antenna.
(Preparation for disassembly on page
Top cover on page 14).
Spare part number
L62404-001
14).
Component replacement procedures 21