Memory Modules - HP VR Backpack G2 Maintenance And Service Manual

Memory modules

Table 5-4 Memory module descriptions and part numbers
Description
16 GB memory module
8 GB memory module
NOTE: It is not necessary to remove the memory module to remove the system board. Remove the memory
module only if it needs to be replaced.
Before removing the memory modules, follow these steps:
1. Prepare the computer for disassembly
2. Remove the top cover (see
3. Remove the memory fan (see
Remove the memory modules:
1. Press in on the sides of the memory module cover (1), and then lift and remove the cover from the
computer (2).
2. Spread the two retention clips outward (1) until the memory module tilts up at a 45º angle.
(Preparation for disassembly on page
Top cover on page 14).
Fans on page 16).
Spare part number
937438-855
937236-855
14).
Component replacement procedures 19