Waveform Download - Eiki EIP-WSS3100 Service Manual

4-7 Waveform download

After replacing Lamp driver, the "waveform download"
is needed .
1. Hold on "Power" and "Menu" button and plug in the
power cord.
2. The "Power LED" will flash red about 2s, then release
the "Power" and "Menu" button.
3. Press "Power" button when the "Power LED" flash
red and blue alternately.
4. The "Power LED" will light blue about 5s, then it will light
red(Note: If the power LED solid blue or the lamp LED
light, please repeat the step 1-3
5.The waveform download is finished.
6. Pull out the power cord.
).
Confidential
4-13