Test Inspection Procedure - Eiki EIP-WSS3100 Service Manual

4-5 Test Inspection Procedure

1. Check Points
Check item
Firmware version
TB implementation
Cosmetic
Logo
Lamp cover
Zoom in/out
Keypad
2. OSD Reset
After final QC step, we have to erase all saved change again and restore the OSD
default setting. The following actions will allow you to erase all end-users' settings and
restore the default setting:
(1) Please enter OSD menu.
(2) Choose "Setting" and execute "Reset" function
Check point
All firmware version must be the latest version
Related TB must be implement
Cosmetic can not be broken
Missing logo, missing prints and blurry prints are
unacceptable
It should be locked in the correct place.
The function should work smoothly
All keypad buttons must operate smoothly
Confidential
4-11