Parameters; Parameters Of Aq 4Xi Hart; Channel/Technology Parameters - Siemens SIMATIC ET 200SP Manual

Parameters

5.1

Parameters of AQ 4xI HART

You define the functioning of the Q 4xI HART analog module via parameters.
The parameters are subdivided into:
● Channel/ technology parameters (data record 128)
With PROFIBUS DP GSD configuration, there is a reduced configuration via the startup
configuration (Prm frame).
● Parameters that define the display of HART variables in the address space of the module;
HART mapping parameters (data record 140)
With configuration in the user program, the parameters are transferred to the modules via data
records with the "WRREC" instruction; see section Parameter assignment and structure of the
channel/technology parameters (Page 53).
5.1.1

Channel/technology parameters

Parameters of AQ 4xI HART
The effective range of the parameters depends on the type of configuration. The following
configurations are possible:
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation on PROFIBUS DP in an ET 200SP system
Table 5-1 Configurable channel/technology parameters and their default settings
Parameter
Diagnostics
No supply voltage L+
Diagnostics
Overflow
Diagnostics
Underflow
Diagnostics,
Wire break
Analog Output Module AQ 4xI HART HF
Manual, 05/2019, A5E35098013-AA
Value range
● Disable
● Enable
● Disable
● Enable
● Disable
● Enable
● Disable
● Enable
Default Configura‐
tion in RUN
Disable Yes
Disable Yes
Disable Yes
Disable Yes
Effective range with configura‐
tion software, e.g. STEP 7
(TIA Portal)
GSD file PRO‐ GSD file
1)
FINET IO PROFIBUS
DP
Channel Module
Channel Module
Channel Module
Channel Module
5
1)
2)
2)
2)
2)
27