Preface - Siemens SIMATIC ET 200SP Manual

Preface

Validity of the documentation
This documentation describes the analog output module AQ 4xI HART HF, article number
6ES7135‑6TD00‑0CA1.
It supplements the system manual ET 200SP distributed I/O system
support.automation.siemens.com/WW/view/en/58649293). Functions that generally relate to
the system are described in this manual.
The information in this documentation and in the system/function manuals enables you to
commission the system.
Conventions
The following terms are used synonymously in this documentation:
Term
AQ 4xI HART HF
Actuator
Please also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product and on the section of the documentation to which particular attention
should be paid.
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary and
Analog Output Module AQ 4xI HART HF
Manual, 05/2019, A5E35098013-AA
Synonyms Notes
AQ 4xI HART; Unless otherwise specified, applies to the product analog
Analog output mod‐ output module AQ 4xI HART HF, article number
ule AQ 4xI HART 6ES7135‑6TD00‑0CA1.
Field device The following applies in this documentation: The field de‐
vices connected to the analog output module are actua‐
tors.
The field devices connected to an input module, on the
other hand, are sensors.
(http://
3