Settings - Komfovent Domekt Series User Manual

EN

3.4.8. Settings

Most of the settings are performed in the SETTINGS window. You can access this window by pressing SETTINGS button
at the top of the window.
SETTINGS
USER INTERFACE
Language
Flow units
AHU name
DATE/TIME
Day - month - year
Time
CONNECTIVITY
DHCP
IP address
Subnet mask
Gateway
BACnet ID
Modbus ID
RS-485
INFORMATION
C6 ID
Main module firmware
Control panel firmware (1)
Control panel firmware (2)
Log
Settings file
SAVE CHANGES
RESTORE TO DEFAULT
After changing any settings, press SAVE CHANGES to apply new values.
To discard changes, return to the start window by pressing the return button.
Button RESTORE SETTINGS restores all settings to the factory defaults. Be careful not to press this button accidentally.
32
English
m³/h
Komfovent
01 06 2018
12 15
Off On
192 168 0 60
255 255 255 0
192 168 0 1
60
254
19200 baud 8E1
ANMP8-Nx4gXr-3OdgVn-GIA
C6 1.3.18.21
C6 1.1.3.14
*.*.*.*
Download
Save Load
ALARMS SETTINGS
LOGIN PASSWORD
Enter new password
Confirm new password
CONTROL MODE
Flow control mode
Supply flow correction
Extract flow correction
Temperature control mode
CONTROL SEQUENCE
Icing protection
Indoor humidity
Stage 1
Stage 2
External coil type
Stage 3
Allow dehumidifying with cooling
AIR QUALITY
Impurity control
Humidity control
Sensor 1
Sensor 2
Outdoor humidity
Minimum intensivity
Maximum intensivity
Check period
FILTERS
Clean filters calibration
UAB KOMFOVENT we reserve the right to make changes without prior notice
user Logout
TURN OFF
CAV
0 m³/h
0 m³/h
Extract
On
Auto
--.- %
Electric heater
External coil
Cold water
None
CO2
RH
None
20 %
70 %
2 h
Confirm
C6M_GUIDE2-19-04