Operation; Weighing; Taring - KERN FXN-N Series Operating Manual

8 Operation

8.1 Weighing

 Start balance by pressing
 The balance will carry out a self-test
 As soon as the weight display shows „0.0" and the triangle symbol
stability display
 However, you can reset the weighing scale to zero by pressing
 Switch off balance using
The „0.0" display disappears and the balance is switched off.

8.2 Taring

The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the weighed material is displayed in subsequent weighings.
 Put on weighing receptacles and press

 Place goods to be weighed in the weighing container.
FXN-N-BA-e-1613
.
appears, the scale is ready for weighing.
the button.
.
The zero display appears, and above the reset symbol
the stability symbol
triangle appears.
The weight of the container is now internally saved.
The net weight of the goods to be weighed is displayed.
The weight of the weighing container will be displayed as a
minus number (=gross weight) after removing the weighing
container.
.
and the net weight symbol
above the
the
15