Hold Function - KERN FXN-N Series Operating Manual

9.7 Hold function

 Start balance by
 Press
and
 01 FnC appears
 Confirm with
 FnC 00 appears
 Use the
button to change between the numeric values.
 Increase the number with
 Decrease the number with
 Now enter FnC 06
 Confirm with
 Enter required setting (see tables below)
 Confirm with
 Switch balance off and on again.
0 Hold function switched off
1 Peak-Hold function
2 Hold 1
3 Hold 2
24
at the same time in weighing mode.
button
button.
button.
button, hold 0 will appear flashing.
button
The maximum load value will be frozen and
displayed.
Delete value by pressing any button.
When the display is stable, the stable value is
displayed.
Delete value by pressing any button.
When the display is stable, the stable value is
displayed.
When the weighing plate is unloaded, the display
goes to zero, the Hold function will be left
automatically and the balance changes into the
weighing mode.
FXN-N-BA-e-1613