KERN FXN-N Series Operating Manual page 52

0 0 0 0 0
a b c
• a
1 = acoustic signal on
0 = acoustic signal off
• b
1 = acoustic signal at stable display
0 = acoustic signal at instable display
• c
1 = acoustic signal when the weighed material is between the upper and the
lower limit value
0 = acoustic signal when the weighed material is outside the both limit values
and bigger than 10d
In the display the following symbols will appear:
1.
2.
3.
Delete limit values:
Set upper and lower value to 0
22
b
Weighing material above upper limit value
Weighing material within both limit values
Weighing material below lower limit value
FXN-N-BA-e-1613