Huawei IN200 User Manual page 31

Huawei IN200 NIC
User Guide
----End
On the OS Supported by Non-Huawei OFED
Step 1 Log in to the OS of the standby server.
For details, see
Step 2 Run either rpm -qa | grep rdma and rpm -qa | grep libib commands or dpkg -l | grep rdma
and dpkg -l | grep libib commands to check whether the OFED has been installed.
l
l
Step 3 Run the rpm -e X or dpkg -r X command to uninstall the original OFED package. In the
command, X indicates the names of all OFED packages displayed in the command output in
Step
Step 4 Click
Step 5 Compile the rpm/deb package (including compat-rdma and rdma-core) by referring to
README.txt in the OFA OFED package.
Step 6 Upload the rpm/deb package to the OS by referring to 7.3 Transferring a File Using the
Virtual Directory.
Step 7 Run therpm -ivh *.rpm or dpkg -i *.deb command to install the OFA OFED V4.8-2.
Step 8 Install the RoCE driver in the directory where the RoCE driver package is stored.
l
l
Issue 06 (2019-07-27)
NOTE
This method takes effect temporarily. If you require the OS to automatically load the driver upon startup,
add the preceding two commands to the automatic startup script of the OS.
7.1 Logging In to the Real-Time Server
If the OFED is installed, go to
If the OFED is not installed, go to
2.
OFA OFED-4.8-2 to download the OFA OFED package of the 4.8-2 version.
On the CentOS, SUSE, EulerOS, or RHEL:
Run the rpm -ivh<name of the driver software package command to install the driver
package.
The following commands use RHEL 7.3 as an example:
[root@localhost driver]# rpm -ivh
hiroce-2.3.1.0_3.10.0_514.el7.x86_64-1.el7.x86_64.rpm
Preparing...
[100%]
Updating / installing...
1:hiroce-2.3.1.0_3.10.0_514.el7.x86################################# [100%]
On the Ubuntu:
NOTE
The NIC driver installation depends on the module-init-tools component. If the module-init-tools
component is not installed on the OS, download and install the module-init-tools component based on
the OS version from the official Ubuntu/Debian website.
1. Download the module-init-tools component.
Official Ubuntu website download address
–
– Official Debian website download address
2. Upload the module-init-tools component file to the OS by referring to
Using the Virtual Directory.
3. Run the following command to install the module-init-tools component:
dpkg -i module-init-tools.deb
Copyright © Huawei Technologies Co., Ltd.
Desktop.
Step 3.
Step 4.
#################################
2 Installation and Maintenance
7.3 Transferring a File
22