Setting Sp Scheduling (-T) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Parameters
Parameter
devicename
mode
Usage Instruction
None
Example
# Check whether ETS is enabled for enp6s0.
[root@localhost ~]# hinicadm ets -i enp6s0
enp6s0
up2tc:
pcnt:
strict:
# Enable ETS for enp6s0.
[root@localhost ~]# hinicadm ets -i enp6s0 -e 1
Set enp6s0 ets succeed

6.1.4.47.2 Setting SP Scheduling (-t)

Function
The ets -t command is used to set SP scheduling of a device.
Format
hinicadm ets -i <devicename> -e <mode> -t <tc>
hinicadm ets -i <devicename> -t <tc>
Parameters
Parameter
devicename
mode
Issue 06 (2019-07-27)
Description
Indicates the name of the
IN200 to be queried and set in
the system.
Enables or disables the ETS
function.
ets state: disable
3 3 3
100 0 0
0 0 0
Description
Indicates the name of the
IN200 to be queried and set in
the system.
Enables or disables the ETS
function.
Copyright © Huawei Technologies Co., Ltd.
3 3 2
0 0 0
0 0 0
6 Management Tools
Value
For example, the value can
be enp6s0 or enp7s0.
l 1: enables ETS.
l 0: disables ETS.
1 0
0 0
0 0
Value
For example, the value can
be enp6s0 or enp7s0.
l 1: enables ETS.
l 0: disables ETS.
112