Huawei IN200 User Manual page 30

Huawei IN200 NIC
User Guide
...........................................................................................................................................................................................................................................
...........................................................................................................................................................................................................................................
Preparing...
Updating / installing...
2019-07-10 09:33:26 [INSTALL] install_rpm perftest ok
2019-07-10 09:33:26 [INSTALL] install driver
2019-07-10 09:33:26 [INSTALL] install OFED software ok.
To load the new driver, run:
/etc/init.d/openibd restart
Step 7 Install the RoCE driver in the directory where the RoCE driver package is stored.
l
l
Step 8 Make the driver take effect.
Run the following commands on the OS.
modprobe hiroce
service network restart
Issue 06 (2019-07-27)
1:perftest-debuginfo-4.4-0.5.g1ceab################################# [ 50%]
2:perftest-4.4-0.5.g1ceab48
On the CentOS, SUSE, EulerOS, or RHEL:
Run the rpm -ivh<name of the driver software package command to install the driver
package.
The following commands use CentOS 7.4 as an example:
[root@localhost driver]# rpm -ivh
hiroce-2.3.1.0_3.10.0_693.el7.x86_64-1.el7.centos.x86_64.rpm
Preparing...
[100%]
Updating / installing...
1:hiroce-2.3.1.0_3.10.0_693.el7.x86################################# [100%]
On the Ubuntu:
NOTE
The NIC driver installation depends on the module-init-tools component. If the module-init-tools
component is not installed on the OS, download and install the module-init-tools component based
on the OS version from the official Ubuntu/Debian website.
1. Download the module-init-tools component.
Official Ubuntu website download address
n
Official Debian website download address
n
2. Upload the module-init-tools component file to the OS by referring to
File Using the Virtual
3. Run the following command to install the module-init-tools component:
dpkg -i module-init-tools.deb
Run the dpkg -i<name of the driver software package command to install the RoCE
driver.
The following commands use Ubuntu 18.04.1 as an example:
root@ubuntu18041:/home/ubuntu # dpkg -i
hiroce-2.3.0.2-4.15.0_29_generic.ubuntu.amd64.deb
Selecting previously unselected package hiroce.
(Reading database ... 80445 files and directories currently installed.)
Preparing to unpack hiroce-2.3.0.2-4.15.0_29_generic.ubuntu.amd64.deb ...
Unpacking hiroce (2.3.0.2) ...
Setting up hiroce (2.3.0.2) ...
Installing... Please wait for a moment.
Install hiroce driver package successfully.
Copyright © Huawei Technologies Co., Ltd.
################################# [100%]
################################# [100%]
-----------------pass
#################################
Directory.
2 Installation and Maintenance
7.3 Transferring a
21